Two-dimensional physics experiment
Starter challenge
Step 1 of 4
Build your first experiment
Choose Add block, then draw a block above the ground.
- 1Add a block
- 2Set velocity
- 3Run
- 4Pause & reset
The highlighted control is your next step.
Stage 1
First Push
Push the power core into the charging dock and keep it there until fully charged.
1. Press the green Run button above to begin.
2. Use the keyboard arrow keys (recommended), or click the on-screen buttons to control the Pusher.
Your choice changes the physical setup.
One rope is available. Attach its two ends wherever you choose, and reset it if you want to try again.
1 rope available
One compression spring is available. Place it wherever you choose, and reset it if you want to try again.
1 spring available
One disk is available. Choose its starting location, and reset it if you want to try another position.
1 disk available
One block is available. Choose its starting location, and reset it if you want to try another position.
1 block available
Press Run, then use Left and Right.
Needs attention
Pusher
Quick propertiesSelected object
Select and inspect
Choose an object to inspect it. Drag an object while paused, or press Run to begin the trial.
Control the Pusher
Press Run, then use ← → to move. Press ↑ to jump when gravity is on.
With friction, the Pusher walks. Without friction, the jetpack provides surface movement and left/right control in the air. With gravity off, use all four arrow keys to fly. Release the arrows to brake.
Camera follow starts on so the Pusher stays in view. Turn it off in Appearance & Display.